Terminal Blocks
Connectwell is one of India's leading manufacturers of terminal blocks, relays, interface modules, installation accessories and power supplies for control panels. SSC Control is an authorised Connectwell partner, supplying the full range with genuine products, warranty and technical support across Gujarat and India.
Feed-through
Feed through terminal blocks in screw clamp (CTS, CY), spring clamp (CX) and push in (CP) styles, 0.2 to 240 sq mm.
- 0.2 to 240 sq mm
- Screw / Spring / Push-in
- DIN Rail
Multi-connection
Three and four wire feed through blocks that distribute one potential to several conductors.
- 3 / 4 Conductor
- One Potential
- Screw / Push-in
Multi-level
Double and triple level blocks for high density wiring up to 1000V.
- 2 / 3 Level
- High Density
- Up to 1000V
Ground
Yellow green earth blocks with direct DIN rail grounding foot, 0.2 to 10 sq mm.
- Earth / Ground
- Rail Contact
- Yellow Green
Fuse
Fuse carrier blocks for 5x20 and 5x25 mm cartridge fuses, with optional blown fuse LED.
- Fuse Carrier
- 5x20 / 5x25 mm
- Blown Fuse LED
Disconnect & Test
Knife disconnect and test blocks for isolating and testing circuits without removing wires.
- Knife Disconnect
- Test Sockets
- Isolation
Distribution
Power distribution blocks splitting one incoming feed into many outgoing ways.
- Power Distribution
- 1 In, Many Out
- Modular / Push-in
Sensor & Actuator
Slim push in sensor and actuator blocks for two, three and four wire sensor cabling.
- Sensor Wiring
- 2 / 3 / 4 Wire
- Push-in
Marshalling
Multi level push in marshalling blocks connecting many wires per block for signal marshalling.
- Marshalling
- Multi Level
- High Density
High Current
Stud and bolt busbar blocks for ring and fork lug connection up to 185 sq mm, 1000V.
- Stud / Bolt
- Up to 185 sq mm
- Lug Connection
Miniature
Micro terminal blocks for DIN 15 rail in junction boxes and tight spaces.
- Miniature
- DIN 15 Rail
- Junction Box
Panel Mount
Surface and panel mount blocks that screw directly to the panel, in screw or spring clamp.
- Panel Mount
- Screw / Spring
- Stackable
Thermocouple
Thermocouple blocks with matched alloy elements per DIN 43713 for J, K and T types.
- Thermocouple
- Matched Alloy
- J / K / T Type
Electronic / Component Carriers
Double level blocks with built in LED or diode components for supply on indication.
- Built-in LED / Diode
- Supply Indication
- Double Level
Need a terminal block?
Our team can size the terminal type, wire range and accessories for your panel.